- This catalog has no sub-catalogs.
Tilta Nucleus-Nano Wireless Lens Control System
FULL DAY HIRE
The Tilta Nucleus-Nano is a revolutionary wireless lens control system specifically designed for handheld gimbal systems. It makes it possible for a single operator to control a lens gear while simultaneously operating their gimbal. The Nano system is compatible with all DSLR, mirrorless, & modified “cine-style” vintage photo lenses.
The Nano Hand Wheel Controller has a compact knob design similar to professional follow focus hand units (the design is very similar to the Tilta Nucleus-M hand unit’s focus wheel). The Nano Hand Wheel Controller has no delay. It is highly responsive, wireless, & accurate. It is powered via a single 14500 rechargeable battery (which is included in the kit) for 6 hour operating time.
The Nucleus-Nano uses a brand new state of the art power-efficient miniature motor. The Nano Motor features low noise & high torque. It can perform super-fast focus pulls with silent precision! The built-in 15mm rod adapter allows for flexibility & compatibility with a wide range of camera rigs & professional mounting solutions.
The motor has a 5-18V input tolerance for power via a Micro USB port. This allows the motor’s power to be drawn from 5V Micro USB output or via a D-Tap.
The Nano Motor has its own built-in motor drive that communicates directly with the Nano Hand Wheel Controller. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup & a quicker setup time. Simply set the Nano Motor & Nano Hand Wheel Controller to the same channel & you will have full control. The wireless range of both the Nano Hand Wheel Controller & Nano Motor is 300 feet!
The Nano Motor allows for automatic calibration of the lens as well as a manual calibration if you are using lenses that don’t have hard end stops at close focus & infinity via the ability to set A-B limits on the Nano Hand Wheel Controller. Every motor has a 0.8 mod, which is the standard gear size for most cinema lenses. The torque of the Nucleus-Nano Motor at 5.5V is 0.65Nm & at 14.8V is 1Nm
The Nano Motor is also able to connect to the Nucleus-M’s FIZ hand unit & hand grips, allowing for a variety of ways to control the motor as you see fit.
Lastly, the Nano system can provide record Run/Stop functionality for numerous camera systems.
- 1 x Nucleus-Nano Hand Wheel Controller
- 1 x Nucleus-Nano Wireless Follow Focus Motor
- 1 x 15mm Single Rod Mounting Baseplate For 95mm Lens
- 2 x 1/4″-20 Hex Screws
- 2 x Rod Mount Hex Screw
- 1 x 15mm x 100mm Black Aluminium Rod
- 1 x 31cm 5V Micro USB male to 5V Micro USB male motor power cable
- 1 x 12V / 2A Ronin-S to 5V Micro USB male motor power cable
- 2 x Photographic lens follow focus gear rings
- 1 x Nucleus-Nano Hand Wheel Attachment Plate for Ronin-S/G2x
- 1 x Nucleus-Nano Hand Wheel Attachment Adapter for Zhiyun Crane 1
- 1 x Nucleus Hand Wheel to 15mm Rods Bracket
- 1 x 14500 Battery Charger
- 2 x 14500 Batteries
- 1 x M4 Allen key
- 1 x M6 Allen key
- 1 x User Guide
Links & Downloads: